• Welcome to Sansel
enquiry@sansel.net

Enquiry Now

+91 98401 49941

Call Now

9.30 AM to 6.30 PM

Monday - Saturday

PI 542A

SANSEL offers PI 542A Model PROCESS INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These INSTRUMENT offer extreme reliability and low cost for Process measurement and logging. PI 542A is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery.

PI 542A can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 - 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.

Application

Monitoring , Recording, Controlling process in various Applications as follows

  • TDS / Conductivity
  • Flow
  • Temperature
  • Level
  • Humidity
  • Voltage / Current / Power
  • Resistance and More....,

Technical Specifications

Model PI 542A
Display 4 Digit 7 segment RED LED
Analog Inputs 0 - 20 mA, 0 to 75 mV, -10 to 10 V DC, 0 - 4000 Ù (H & L Limit Programmable)
Temperature Inputs RTD - PT 100, PT 100, Thermocouple - J, K, R, S, T, B, N, E
Analog Display Range* - 1999 to 9999 (H & L Limit Programmable)
Temperature Range (H & L Limit Programmable) RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F)
TC - J (- 200 to 1200°C / -328 to 2192°F)
TC - K (- 200 to 1372°C / -327 to 2501°F)
TC - R (- 40 to 1768°C / -40 to 3214°F)
TC - S (- 40 to 1768°C / -40 to 3214°F)
TC - T (- 200 to 400°C / -328 to 752°F)
TC - B (300 to 1820°C / 572 to 3308°F)
TC - N (-200 to 1300°C / -327 to 2372°F)
TC - E ( -200 to 999.9°C / -327 to 1832°F)
Unit selection °C / °F (for RTD & TC inputs)
Analog Resolution 0.001 / 0.01 / 0.1 / 1 / 1 (Selectable)
Temperature Resolution 0.1 / 1 °C / °F (optional 0.01 for RTD - PT 100 I/P up to 99.99 °C Factory are setable
Accuracy ± 0.1 % of FS
Filter Constant 1 - 100 % (Adjustable)
Display Hold option Peak, hold & average (any one selectable)
Hold delay 0 - 999 sec (selectable)
Relay Output**(optional) 2 Relay (5A rated) with 6 Relay Status Selection, Hysterisis, Cyclic Delay
Re Transmission**(optional) Opto Isolated Analog Output 4 - 20 mA or 0 - 10V DC
PC Communication** RS 485 (2 wire)(optional)
Sensor Supply(external) 24 V DC ±10% @ 100 mA
Operating Environment - 50ºC / 5 to 95 % RH Non Condensing
Power Supply 90 to 270 V AC / DC / 50 / 60 Hz
Over All Dimension 48(H) X 96(W) X 110(D) mm
Cut out Dimension 44(H) X 90(W) mm
Housing Panel Mountable ABC Plastic
Weight 250 grams (Approx.)

Standard Delivery

  • 5 ½ Digit 7 segment RED LED display
  • High Accuracy
  • Compact Size
  • 24 Bit ADC Resolution
  • Selectable Inputs RTD , all types of thermocouples , mA,mV , Voltage , ohms.
  • Wide Selectable Range between -1999 to 19999 counts
  • Easy Field Configurable with Front Key Calibration
  • No Hardware Selection For the Input Signals
  • Optional Opto Isolated Re Transmission Output.
  • Optional RS 485 (2 wire) Output for PC communication
  • Optional PC software with Monitoring, Logging, Report & Graph
  • Optional MODBUS RTU protocol
  • 24V DC External Sensor Supply
  • Programmable Decimal Point & Display Noise Filter
  • Universal Supply Voltage 90 to 270 AC / DC
Analytical Instruments manufacturers

Location

Mr. M. Sankar No. 1/46, Ganga Nagar, M. M. D. A. Colony, Maduravoyal, Chennai – 600 095, Tamil Nadu, India.

Calibrator manufacturers

Call Center

+91 72999 72085
+91 44 2378 3951

Analytical Instruments manufacturers in chennai

Email Us

enquiry@sansel.net
info@sansel.net

Sansel

Sansel Instruments & Controls
Hi there!
How can I help you?

sensor manufacturers